|
|
|
Reference
Number |
Make
Model |
Description |
Price |
SC 1004 |
INDUSTRIAL |
2" X 8" |
$1,600.00 |
SC 1026 |
INDUSTRIAL |
Model C500, cleaned & painted. |
$1,500.00 |
SC 1028 |
MID OREGON |
Left hand saw, 5HP. 3 phase, 440 Volt motor |
$1,200.00 |
SC 1031 |
INDUSTRIAL |
Right hand saw, 5HP. 3 phase 440 volt 2" x 8" capacity |
$700.00 |
|
|
Reference
Number |
Make
Model |
Description |
Price |
SRE 1002 |
Baker |
15 HP - 234/60 all electric |
$5,000 |
SRE 1004 |
Turner |
This is a 52" 3 band system in good condition. |
Offer |
SRE 1004A |
Turner |
Twin, 25HP motors ready to run. Hydraulic feed. |
$12,500.00 |
SRE1005 |
Wadkin |
Vertical 28", Band motor 10 HP. 220 volt 60 Model PBR-HD .75w, 220 \V 60 Hz, 3Ph, vari drive feed speed 4-25 meters p.m.
Capacity: 13" high x 20" wide (" blade to line bar, 11 " blade to feed wheel |
Call offer |
SRE 1006 |
Tri-State |
36" Wheel Diameter #T-36-4 s/n 11-16-72112 1/2 speed vari-speed electric feed control, with lube system 25HP. |
Price $12,000.00 |
SRE 1008 |
Ferrari |
Resaw Klamath,Twin 42" wheels, Hydraulic feed rolls, Mechanical strain |
$58,000.00 |
SRE 1009 |
Turner |
Twin, (2) 25HP. saw motors, hyd. feed. New hyd. motor, rebuilt power infeed system. Call for more info. |
$22,000.00 |
SRE 1025 |
Turner |
42" resaw with tilt.Shop TSRG 15,Good shape. |
Call offer |
SRE 1030 |
MERCHON |
Twin 36" Tilt with hydraulic feed system. Each band 15HP. motor, 460 volt, 3 phase. |
$6,500.00 |
|
|
Reference
Number |
Make
Model |
Description |
Price |
SRI1001 |
Shopbuilt |
Roll feed open throat rip saw. 8" arbor 25 hp, 1hp feed |
$2,500.00 |
SRI 1003 |
Portland Iron Works |
5 x 2 Hyd. 1972, Tempasonies Hyd. cylenders, 5 shifting blades, 1-moving side head, 1- stationary side
head, Lason lights, line up chains, out feed belt. |
$85,000.00 |
SRI 1005 |
|
Quad rip saw, sheet metal feed table, infeed out feed, 8' return roll case, pushbotton control, 50HP. ,
Lesson drive motor. |
$4,000.00 |
SRIG 1013 |
Shop Built |
30 HP. 14" arbor with electric feed rolls. Infeed with Radial Arm Saw for cross cutting and outfeed
belt. |
$3,500.00 |
SRIG 1014 |
Mereen Johnson |
Model 441-A, Roller feed with 75 HP. motor, 24" arbor |
$6,500.00 |
SSL 1001 |
DIEHL |
Saw needs minor work to brcome operational. |
$2,500.00 |
SSL 1008 |
Hine R-S-14 |
Stright line rip saw, 1983, 220 V, 3HP. |
$3,850.00 |
SSL 1009 |
DIEHL |
Older. |
$4,000.00 |
|
|
Reference
Number |
Make
Model |
Description |
Price |
SN 1002 |
NASH |
Sander for sanding Lath turnings - 10 Spindle. |
$8,500.00 |
SN 1003 |
Timesaver 452 |
52" wide capacity abrasive planer-sander system. Single head top and bottom system with transfer belt.
125HP. per hea. Complete system with extra parts. |
$15,800.00 |
SN 1004 |
Timesaver |
Model #152, 52" rubber contact roll with platen. 50HP. photo eye tracking system with safty break.
Older machine in good condition. |
$8,500.00 |
SN 1007 |
Timesaver |
Model 352 S/N 541-479-5357, 2 head. |
$18,000.00 |
SN 1009 |
Timesaver |
Series 200IC Planer/Sander |
Call Offer |
|
|
Reference
Number |
Make
Model |
Description |
Price |
SH 1002 |
GRIGGO |
Model PF 310 S/N 40998, 1999. |
Call make offer |
|
Tenoners & Trimmers |
Reference
Number |
Make
Model |
Description |
Price |
TE1001 |
Mereen Johnson |
Md. 620-Det. s/n MJ3480,3 station each side,Jump Dado, shaper with angle gain. Powered opening
8' max, 3hp. vari. speed reeves drive unit. Call for more info. |
$40,000.00 |
TE 1003 Photo |
SCMI
Photo |
8 head. 4 each side, 2= 7 1/2 HP. Trim, 2= 15HP. Chop, 10' open . Photo |
$30,000.00 |
TE 1002 Photo |
Hayes |
Ft. Double End, 4 Head, 2-e Side, Jump & Cope, S.H.P. |
$4,000.00 |
TE 1004 |
Millbury |
P.F.T. Dado machine Model 200 s/n M-400 HP. 5, voltage 480 |
$2,900.00 |
TE 1020 |
JENKINS |
Model 146, 3 Stand, 6 station DBL. end machine, Traverse 144" Center, 70" before holddowns. RH operator, LH fence,
Elect. 460 V., 60cyl., 3Ph. Feed speeds 15-75 fpm. |
Call for price |
|
|
Referen ce
Number |
Make
Model |
Description |
Price |
MO 1014
photoPhoto |
Model 229 |
4 head 8" machine with top & bottom jointers & 3 sets of side heads Good condition.
|
Call offer |
MO101 3 PhotoPhoto Photo |
WADKIN |
5head 12 " moulder. Bottom head 12hp., Right side 12hp., Top 12hp., Bottom head 12hp.,
motors are variable horsep[ower and RPM 3500 to 5900, depending on wiring configuration. Unit will be checked ready to run. Comes wit roll feed. Model # 62254 S/N
FD-5053 |
$32,000. |
MO100 7 |
VONNEGU T |
4 Head Moulder Hyd. Feed Top 10hp. sides 5hp. bottom 10hp. W/tooling. Good
Condition. |
Make offer |
MO100 5 Photo |
EKSTROM CARLSON |
4 head Moulder, chromed bed, very good buy. Good Condition |
$7,500. |
MO100 8 Photo |
MATTISO N 276 |
4 HEAD MOULDER, MOTOR FEED, MECHANICAL HOLD DOWNS, 8" |
|
$1,500. |
MO 1020 Photo |
Mattison 228 |
Top & Bottom Heads, 20 HP., 4" x 16", Mac. Hy. Side heads 10 HP.Photo |
$25,000. |
MO101 2 |
Robinson |
Md. 2N/T 1976 Six head; Bottom, Top, Right. Left, Top, Bottom. All
motors 15hp. sph. V belt drive to spindles. Call for information. |
|
|
$26,000. |
MO100 6 PhotoPhoto |
WINIG U-17-A |
6 head machine, bottom right,left,top,bottom tilting. Top & bottom heads 10hp.Side heads 71/2 hp. |
$25,000. |
|
|
Reference
Number |
Make
Model |
Description |
Price |
PL 1027 Photo |
Buss Photo |
Double Surfacer: 4 screw adjustable bed, 30" x 14", 25hp. upper & lower motors.
|
$16,500. |
PL1004 |
NEWMAN |
Top & bottom heads. Side heads 18' wide. model 7376/ with 6' x 8' landing chain. Top & bottom heads
driven by 100 HP. motor, flat belt spendle driven. |
Call offer |
PL1005 |
Timesaver |
Model 2001C Knife planer-Sander. Nice unit with low hours. (Call) |
$55,000. |
PL 1024 |
Woods |
Md. 415-M2, 20" 6 head planer, Top head 50HP,Bottom-40 hp, Right side 25HP, , Left 25HP,Top 40HP,Bottom 30Hp, comes with
infeed Landing chain with feed plus tilt hoist. Fair condition. |
$29,500. |
PL1023 |
|
|
|
PL 1026
Photo |
American |
18" planer, Top head 220/440-3PH-5HP motor 3600 RPM |
call make offer |
|
|
Reference
Number |
Make
Model |
Description |
Price |
BO1001 Photo
|
Grum Schwense n |
8 spindle unit. Adjustable minimum spacing 2 3/4 inch minimum. Boring area 59" x 20",
6" stroke, hydraulic control. operated by Two 2hp. motors. |
$3,500.00 |
BO 1010 |
Root D 170 |
Root D-170 Horizontal Boring Machine. 5hp. driving a common drive shaft. |
$7,500.00 |
|
FInger Jointers |
Reference
Number |
Make
Model |
Description |
Price |
FJ1001 |
INDUSTRIAL |
INDUSTRIAL FINGER JOINTER: INDUSTRIAL 48" |
BREAKDOWN HOIST, MECHANICAL LIFT, 6'3 |
BELT LANDING TABLE, 8' X 8" BELT CONVEYER, |
INDUSTRIAL FJS25 INFEED TABLE, S/N 25-9-2571, |
(2) CUTTING HEADS, END GIVER, INDUSTRIAL |
CROWER, SLAT TYPE INFEED, SET POSITIONS |
TRIM SAW, PUSH BUTTON CONTROLS, OUTFEED TABLE |
WITH LENGTH GAUGES, HYDRAULIC PUSH OFF. |
WITH 3519 TAILOFF |
|
$65.000.00 |
FJ 1003 |
Tri State |
Machine comes with electric's,, exaust tree, infeed tilt, flying cut off sawon press, 15HP.sharper motors, 22 foot press
section, complete system. |
Call make offer |
|
|
Referance Number |
Make Model |
Description |
Price |
MISE. 1040 |
MAREN |
MAREN SAWDUST BAILER MODEL 14, TOP |
FEED, HYDRAULIC CYLINDER LOADER AND |
COMPACTOR, 10 HP HYDRAULIC UNIT, |
MANUAL BAIL SIZER, ELECTRIC PUSH BUTTON |
CONTROLS, S/N 97944. |
|
$10,000 |
|
MISE 1010 |
Weinig |
Rondamat 931 Grinder s/n 931 s/n 931/460 Very good condition |
$12,500.00 |
MISE 1006 |
Peerless |
30 Unit Chip Bin with hydraulic gates, cross top load leveling auger, 15hp. Hydraulic Unit. |
$7,000.00 |
MISE 1020 Photo
|
Taylor Photo
|
Six section clamp carrier. Six clamps per section. 8 foot long material. |
$3,500.00 |
MISE 1011 Photo |
Norfield |
4 Head Norfield Model 1100, Door Jamb machine End trim & Dado 8' capacity |
$8,500.00 |
MISE 1014 |
MOI |
Unit Breaker for finger joint material up to 18' long. Very heavily built machine. |
$4,500.00 |
MISE 1025 |
|
Notcher-Overhead Comet. Hy. feed unit with 12" arbor & tooling. Good shape |
Call make offer |
MISE 1016 |
Shop equipment |
20 ton hy. press, bench vise,dbl. end grinders, portable pressure washer, 1hp. tank mounted air compressor, Drill press,
welders, parts,supplies, etc. |
$2,000.00 |
|
| |
Reference
Number |
Make
Model |
Description |
Price |
MISC1009 |
|
Conveyor 14' x 4" |
$400.00 |
MISC. 1011 |
|
Conveyor 12' x 10" |
$350.00 |
MISC. 1012 |
|
30' pull chain, Roof top chain ,4 sections |
Call make offer |
|
|
Reference
Number |
Make
Model |
Description |
Price |
MH 1004 |
|
2 arm Break Down hoist/ arms 52" long. Between arms- 42" outside to outside. Back
board 59" high - 8' long. New motor, gear box, Break. Cleaned & Painted. |
Call offer |
|
|
|
|
SCI1002 |
|
Tilt scissors lift, 12' x 4' wide.. Comes with a 36' 3 chain pullchain. |
$5,500.00 |
|
|
Reference
Number |
Make
Model |
Description |
Price |
WL 1023 |
Shop built |
Manual operation, air chuck, adjustable center support with bearing, capacity 6" Dia. x
77" long. 25 HP. drive, 440-3-60, with cutterheads,knives and setup stand. |
$26,500.00 |
WH 1031 |
Williams |
18" x 20" Throat with shutte. 4 hammer. |
Price call |
WP 1008 |
Schutte Hammerm ill |
40 HZF Type P s/n 255, 75 HP. Horizonal Feed 4 1/2" x 4" throat |
$6,500.00 |
|
|
Reference
Number |
Make
Model |
Description |
Price |
VE1001 |
Marunaka ML250V |
Veneer drying system, complete with chipper, All material handling ready to Run 12' width
capacity. Moore type GU factory #2446. Good Condition. |
Offer |
|
|
|
